___________

Update: Following are some additional details from a report in Pioneer.

• Amtech Auto Engineering would set up the complex at an investment of Rs 15,820 crore near Tangi- Choudwar. It would set up a two million tonne steel plant and 500 MW captive power plant in the complex. With this about 33,000 people will get both direct and indirect employment.

  It may be mentioned here that Jamsedpur-based RSB Trasmissions (I) Ltd, one of India’s leading auto components manufacturers, is coming up with an auto complex at Mania in Cuttack. RSB Transmission will invest Rs 430 crore in the project.

• The committee also approved JK Cement‘s one million tonne capacity plant on the road between Athagrah and Choudwar.
• BOC would set up an air separation plant at an investment of Rs 434 crore in Rourkela. It would produce oxygen, nitrogen and argons.
• Bijaya Ferro Power Private Limited would set up a power plant at Keshinga in Kalahandi with an investment of Rs 550 crore. It would take water from Tel river to produce 120 MW power.
• Ind-Bharat’s proposal to enhance its power production capacity has also got the nod of the committee. It would set up its plant at Jharsuguda with an investment of Rs 3,300 crore.
• Facor would set up its captive power plant at Rahandia near Bhadrak.
• Due to shortage of water, few plants have also changed their sites. Odisha Cement Power Plant (OCL) has shifted its plant site from Mania to Rajgangpur.
• Jinadal Stainless Steel would set up its plant in Luni instead of Gajatara in Dhenkanal.
• Kalinga Energy Power Limited would set up its plant at Jharsuguda instead of Sambalpur.
• Scwal Brewage would set up its plant at Baranga instead of Choudwar at a cost of Rs 193 crore.
• The Rs 1,320 crore Sahara Power project has shifted its plant to Ghantabahal from Turul.
• German-based Gaunteman Pipery would set up its plant beneficiation plant and pelatisation plant. The beneficiation plant would come up at Barbil and the pelatisation plant at Dhamra. Around 1,605 crore would be invested in the project.
• Aditya Alumina’s proposal to enhance its production from one million tonne to 1.5 million tonne. It would also enhance its power plant from 650 MW to 900 MW.

Following is an excerpt from Orissadiary.

The projects of Adhunic Metalics and Jindal Stainless Steel at Sundargarh and Kalinganagar, respectively have been approved. The SWCLC has also given its green signal for an air-separation plant. Projects, involving Vijay Ferrochorme and Power Pvt Ltd and Adhunic Power plant have been cleared.

Amtech Metals would establish the integrated auto-complex, first of its kind in the state. Moreover, an auto-park, steel and power plant would also be established in the complex. The cost of the entire project has been pegged at Rs 15,820 crore. All the projects are expected to provide direct and indirect employment opportunities to nearly 47,000 and 1.5 lakh people, respectively apart from bolstering the socio-economic conditions in those regions where the proposed projects would come up, state Industries Secretary, Sourabh Garg said.

Tathya has some details on the Adhunik group’s project. Following are some excerpts:

Adhunik Power & Natural Resources Limited (APNRL) has proposed to invest Rs.3883.40 crore for the 4×250 MW power plant in Birmaharajpur in Sonepur district.

… Adhunik Metaliks Limited (AML), another member of the Group has proposed to set up Down Stream Park for stainless and special products with an investment of Rs.286 crore.  … downstream industries in hot-rolling, cold-rolling utensils, kitchen and hardware.  AML has also proposed for stainless steel pipes and alloys, which received the nod.
The park will be set up at Kumarmunda in a 300 acre area in Sundargarh district.

AML is setting up steel plant at Kumarmunda with a capacity of 0.41 million ton per annum (MTPA).

Tathya has also some details on the JSL project. Following are some excerpts.

JSL Limited posed a proposal to set up a Super Critical Thermal Power Station of 1320 (660X2) megawatt capacity, which has been cleared in the meeting. The Rs.4090 crore Greenfield project will be set up at Luni in Dhenkanal district.

Most importantly JSL, which is setting up a 3.20 million ton per annum (MTPA) capacity stainless steel plant at Kalinga Nagar has proposed to set up Stainless Steel Park (SEZ) with an investment of Rs.740 crore.  … The park will promote auto components, kitchen & life style, light engineering, white goods, cold rolling, pipes and tubes, and service centre. 300 acres of land for the park is needed for the park, which will have man power requirement of more than 2000, said sources. JSL plant is likely to produce stainless steel by end of 2010 and the park is also to be completed by the same time reveal the SLSWCA Report.

The above two downstream park proposals are most likely due to the recent government focus on those aspects, before giving mining leases. The govt. needs to make sure that the down stream parks indeed materialize as proposed.